Seiko Watch 8V36 User Guide

You are now the proud owner of a SEIKO Analogue Quartz Watch  
Cal. 8V36. For best results, please read the instructions in this booklet  
carefully before using your SEIKO Analogue Quartz Watch. Please  
keep this manual handy for ready reference.  
Usted es ahora un honrado poseedor del reloj SEIKO analógico de cuarzo  
Cal. 8V36. Para obtener de él los mejores resultados, lea las instrucciones  
del presente folleto con cuidado antes del uso de su reloj SEIKO  
analógico de cuarzo. Guarde este manual para fácil referencia.  
 
CAL. 8V36  
Time indicated by hour, minute,  
second and 24-hour hands  
Alarm indicator  
Shows the alarm engagement/  
disengagement.  
Ultrasonic alarm  
Ultrasonic motor runs at a high  
speed to vibrate the watch at the  
designated time.  
3
 
TIME SETTING  
Pull out CROWN when the second hand is at the 12  
o’clock position and push it back in accordance with a  
time signal.  
Pull out and turn to set the  
time. Then, push in.  
Check that the 24-hour hand is correctly set.  
When setting the minute hand, first advance it 4 to 5 minutes ahead of the desired time and then turn it  
back to the exact minute.  
 
4
ULTRASONIC ALARM  
Turn to set the alarm  
hand to the desired  
alarm time.  
Then pull out.  
To set the alarm time more precisely, turn the alarm hand  
counterclockwise.  
To set the alarm time less than 2 hours ahead of the current time, first advance the alarm hand more than  
2 hours ahead of the current time and then turn it back to the exact alarm time.  
5
 
To engage the alarm  
To disengage the alarm  
Pull out.  
Push in.  
Indicating the alarm is engaged.  
Indicating the alarm is disengaged.  
At the designated time, the watch vibrates for 20  
seconds.  
 
6
NOTES ON ULTRASONIC ALARM  
The alarm can be set on a 12-hour basis.  
When using the ultrasonic alarm, make sure that the watch bracelet fits snugly on your wrist so that  
the vibration of the watch can be perceived clearly.  
Please note that, while you are engaged in an active sport or work requiring arm movement, the  
vibration of the watch may not be perceived clearly.  
The alarm time scale may be graduated differently depending on the model. When reading the current  
time, take care not to mistake the alarm time scale for the current time scale.  
BATTERY LIFE INDICATOR  
When the battery nears its end, the second hand moves at two-second intervals instead of normal one-  
second intervals to indicate that the battery needs to be replaced with a new one.  
BATTERY CHANGE  
The miniature battery which powers your watch should last approximately  
2 years. However, because the battery is inserted at the factory to check  
2
Years  
the function and performance of the watch, its actual life once in your  
possession may be less than the specified period. When the battery expires,  
be sure to replace it as soon as possible to prevent any malfunction. For  
battery replacement, we recommend that you contact an AUTHORIZED  
SEIKO DEALER and request SEIKO SR43W battery.  
* The battery life may be less than 2 years if the ultrasonic alarm is used more  
than 10 seconds a day.  
* When the battery nears its end, the ultrasonic motor runs slowly. In that case,  
replace the battery with a new one. (The time accuracy is not affected)  
7
 
WARNING  
Do not remove the battery from the watch.  
If it is necessary to take out the battery, keep it out of the reach of children. If  
a child swallows it, consult a doctor immediately.  
CAUTION  
Never short-circuit, heat or otherwise tamper with the battery, and never  
expose it to fire. The battery may burst, become very hot or catch fire.  
The battery is not rechargeable. Never attempt to recharge it, as this may cause  
battery leakage or damage to the battery.  
 
8
SPECIFICATIONS  
1
2
Frequency of crystal oscillator .......................... 32,768 Hz (Hz = Hertz … Cycles per second)  
Loss/gain (Monthly rate) ................................... Less than 15 seconds at normal temperature range (5°  
C ~ 35° C) (41° F ~ 95° F)  
Accuracy of the alarm ....................................... ±5 minutes  
3
4
5
Operational temperature range ......................... –10° C ~ +60° C (14° F ~ 140° F)  
Duration of watch vibration ............................... 20 seconds for each time  
Display system  
Time ............................................................. 24-hour, hour, minute and second hands  
Ultrasonic alarm ........................................... Designated alarm time and indication of alarm  
engagement/disengagement  
6
Driving system  
For the watch ............................................... Step motor, 1 piece  
For the ultrasonic alarm ............................... Ultrasonic motor, 1 piece  
7
8
9
Battery .............................................................. Miniature silver oxide battery SR43W, 1 piece  
Battery life......................................................... Approx. 2 years  
IC (Integrated Circuit) ........................................ C-MOS-IC, 2 pieces  
* The specifications are subject to change without prior notice for product improvement.  
9
 

Quantum Wheelchair 06 edge va User Guide
R60 14, XTR80 105, XTR100 85, XTR150 56, XTR300 28, XTR600 14, XTR6 220, XTR8 200, XTR12 140, XTR20 84, XTR33 50, XTR40 42, XTR60 28, XTR80 215, XTR100 17, XTR150 112, XTR300 56, XTR600 User Guide
Radica Games Handheld Game System L7286 User Guide
Rio Audio Portable CD Player SP90 User Guide
RocketFish Power Supply RF 700WPS User Guide
Rosewill Rice Cooker RHRC 13001 User Guide
Samsung Printer SCX 5835 Series User Guide
Samsung Switch Version 11 User Guide
Sanyo Camera Lens LNS S30 User Guide
SeaLand Heat Pump Vacuum Pump User Guide