Congratulations on your purchase of the RF-QX4 wireless
bluetooth headset. This headset represents the state of the
art in wireless headset design and is designed for reliable
and trouble-free performance.
US: RF-QX4 • Canada: RF-QX4-T • Europe: RF-QX4-E • Japan: RF-QX4-J
Package contents
•
Quick Setup Guide
•
•
RF-QX4 headset
•
Ear loop
•
Small, medium
and large ear buds
USB charging cable
and A/C wall adapter
Warning: If the volume is set too high, excessive sound pressure from earphones and
headphones can cause hearing loss.
Features
Power/Send/
End button
Volume
down
Wireless Bluetooth Headset
RF-QX4 / RF-QX4-T / RF-QX4-E/ RF-QX4-J
Volume
up
Charger
connector
Indicator
light
Earpiece
Charging the battery
Charge the headset before using.
•
Connect the charger to the headset and to a power
outlet. While the battery is charging, the indicator
lights red. When the battery is fully charged, the
indicator lights yellow-green.
Note: Charge the headset with the attached USB cable
and provided wall charger only.
Turning the headset on and oꢀ
1 To turn on the headset, press and hold the
Power/Send/End button for about two seconds. The
headset beeps and the indicator blinks green.
2 To turn oꢀ the headset, press and hold the
Power/Send/End button for about four seconds. The
headset beeps and the indicator brieꢁy lights red.
Pairing the headset
1 Press and hold the Power/Send/End button for about
four seconds.The indicator rapidly ꢁashes green. Make
sure that a compatible phone is turned on and within
33 feet (10 meters) of the headset.
2 Release the button.The headset is now in pairing mode.
3 Activate the Bluetooth connection from the phone.
See your phone‘s documentation for instructions.
4 Set the phone to start searching for Bluetooth devices.
5 Select RF-QX4 from the list of found devices.
6 If necessary, enter the PIN Code 0000 to pair and
connect the headset with your phone. In some
phones, you need to make a connection separately
after pairing.
To...
Do this...
Voice dial
Redial
Answer a call
End a call
Press the Power/Send/End button.
Double-press the Power/Send/End button.
Press the Power/Send/End button.
Press and hold the Power/Send/End button
for two seconds.
Refuse a call
Double-press the Power/Send/End button.
Change the volume
Transfer a call between Double-press the Power/Send/End button
connected devices while in a call to transfer the call to the handset.
Press the + (volume up) or – (volume down) button.
QUICK SETUP GUIDE
|
ACS Blender BD User Manual
Alpine Electronics Car Stereo System CDE 9850RI User Manual
ATN Night Spirit MO5 2 User Manual
Baxi Potterton Gold FSB 30 HE User Manual
Canon HF R200 User Manual
Canon VIXIA HR10 User Manual
Directed Video HVM580 User Manual
Hifionics Hifonics Maxxsonics Inc Car Amplifier BRZ3000 1D PRO User Manual
HP (Hewlett Packard) PW550 User Manual
JVC Car Speaker KD R330 User Manual