Abocom Network Card DVG 2101S User Manual

DVG-2101S

VOIP

Specification:

Key Components / Performance

CPU

MPS

DSP

LSI ZSP400/110MHz

Port Functions

1 x 10/100 BaseT ports

Compliant to following standards:

1. IEEE 802.3 (10BASE-T)

LAN

2. IEEE 802.3u (100BASE-TX)

3. IEEE 802.3x (Full-Duplex)

4. Support Full-Duplex operations

1 x Phone port

Phone Ports

1. Type of Circuit : Analog Circuit (FXS)

2. Connector Type : RJ11 connector

WAN:

One 10/100Mbps auto-MDI/MDIX Ethernet port

WAN type: Static IP, PPPoE, DHCP Client, BigPond

NAT Traversal: Outbound Proxy, STUN, UPnP

NTP

DDNS

RJ-45 Connector

Bridge mode

Call features:

Call Hold, Call Waiting, Cancel Call Waiting, Caller ID with Name/Number (Multinational),

Caller ID Blocking. Call Waiting Caller ID with Name/Number.

Call Forward - Unconditional, Busy, No Answer, Do Not Disturb.

Call Transfer - Unattended, Attended, Call Blocking with Toll Restriction, Delayed Disconnect

Distinctive Ringing- Calling and Called Number, Off-Hook Warning Tone, Speed Dialing, Repeat Dialing, Three Way

Calling (Media Server required)